Replacing The Drum Cartridge - Sagem LASER PRO 348 User Manual

Press OK on the scanner keypad. The display shows:
TUE 02 APR 13:39
INSERT GAUGECARD
Insert chip card (supplied with the toner cartridge) into the card reader ensuring that the chip is
entered as shown in the drawing below
The following is displayed on the scanner control panel screen:
CHANGE TONER ?
YES= OK - NO= C
Press OK
Once the chip card has been read, the display shows:
TONER OK
REMOVE CARD
Remove the card
Caution -
If the following is displayed, check that you have inserted the chip card the right
way up:
CANNOT READ CARD
REMOVE CARD

Replacing the drum cartridge

To replace the drum cartridge, proceed as shown below:
When the display shows:
CHANGE DRUM
<OK> TO CONFIRM
green arrow
6-6
Maintenance