Wan Setup - Sagem F@ST 1200 User Manual

5 - Configuration
5.3.1.2

WAN Setup

Object: This function is for setting up the wide area network (WAN) access interface.
Select the WAN Setup
The screen opposite appears.
The following fields are common to all the protocols.
Field
VPI
VCI
Encapsulation
Mode
Depending on the protocol chosen, the number of fields to be completed differs.
You must therefore select a protocol mode before completing the various fields.
RFC1483 Bridged
Common fields only.
SAGEM F@st™ 1200 User Guide - 252417101-01
Page 5-10 Sagem Communication document. Reproduction and disclosure prohibited
tab.
Enter a VPI value between 0 and 255.
Enter a VCI value between 6 and 65535 (apart from 16).
Select one of the two proposed encapsulation modes (LLC or
VC Multiplexing).
Meaning