Sagem F@ST 1200 User Manual page 27

The Show: field should be set to Built-
2
in Internet (by default)
The TCP/IP tab appears automatically.
The Configure Ipv4: field should
contain Using DHCP by default. If not,
select this setting from the drop-down
list.
Note: If the Using PPP setting is
displayed, select the PPPoE tab then
uncheck the Connect using PPPoE
box.
Click Apply Now to confirm connection
in DHCP mode.
The network window is updated as
3
shown opposite.
This panel should show the IP address,
the subnet mask supplied by the
modem/router and the default IP
address of the SAGEM F@st
LAN interface (192.168.1.1).
You can now close the network window.
The DHCP client, DNS servers and Search domains fields are optional.
Sagem Communication document. Reproduction and disclosure prohibited
TM
1200's
SAGEM F@st™ 1200 User Guide - 252417101-01
3 - Installing your modem/router
Page 3-9