Sagem F@ST 1200 User Manual page 44

5 - Configuration
Field
Modem State
WAN IP Address
ADSL Line Status
VPI / VCI
Encapsulation
SAGEM F@st™ 1200 User Guide - 252417101-01
Page 5-8 Sagem Communication document. Reproduction and disclosure prohibited
Three possible cases:
(Writing in green): Normal operation.
(Writing in yellow): The modem is connecting
to the Internet.
(Writing in red): The ADSL line is
disconnected.
Displays the Public IP address (WAN) assigned to the
modem/router.
This field may be empty when the modem/router is in
negotiation mode or the ADSL line is not connected.
Two possible cases:
set up and also the supported ADSL standard.
: indicates that the ADSL link is not set up (line
disconnected, for example).
Displays the VPI supplied by your Internet Service Provider
(ISP).
Displays the VCI supplied by your Internet Service Provider
(ISP).
Displays the encapsulation supplied by your Internet Service
Provider (ISP).
Two possible cases:
VC : Virtual Channel (Encapsulation without header).
LCC : Logical Link Control (Encapsulation with header).
Meaning
: indicates that the ADSL link is