3 - Installing your modem/router
You can install and configure your modem/router with the following interfaces:
Ethernet (see section 3.1),
USB (see section 3.2),
SAGEM F@st™ 1200 User Guide - 252417101-01
Page 3-2
Sagem Communication document. Reproduction and disclosure prohibited
Before installing your SAGEM F@st™ 1200 modem/router, you must uninstall
any other ADSL modem/router.
If you have installed your modem/router with an Ethernet interface and you
want to install it with the other USB interface, you must uninstall the
modem/router.
To do this:
Select Start / All programs / SAGEM F@st™ 1200 / Uninstall.