Leds - Sagem F@ST 1200 User Manual

2.1.1

LEDs

The various LEDs in the figure above are described in the table below:
LED
PWR Power supply presence
This LED is lit when power supply is present.
USB Activation / Activity on the USB link
This LED is lit when the USB interface is active.
This LED is off when no traffic is detected.
ETH Ethernet link
This LED is lit when the ETH interface is active.
This LED blinks in pace in with the traffic.
This LED is off if no traffic is detected.
LINE ADSL line activation
This LED blinks slowly when the ADSL line is being synchronized,
This LED is lit when the ADSL line is synchronized.
Sagem Communication document. Reproduction and disclosure prohibited
Meaning
SAGEM F@st™ 1200 User Guide - 252417101-01
2 - Description
Page 2-3