Sagem F@ST 1200 User Manual page 23

Connect the RJ45/RJ45 Ethernet lead
5
by connecting the end of this lead to the
ETH socket on your
SAGEM F@st™ 1200 then connecting
the other end to an available Ethernet
socket on your computer according to
the animation displayed on screen.
Click the
continue installation.
The screen opposite appears, if a
6
number of Ethernet cards are installed
on your computer.
Select the Ethernet card connected to
TM
the SAGEM F@st
drop-down list.
Then click
your choice and continue with
configuration.
The screen opposite appears and
7
prompts you to wait.
The screen opposite appears.
8
Select your country of residence and
your Internet Service Provider (ISP).
Click the
continue installation.
Sagem Communication document. Reproduction and disclosure prohibited
button to
1200 from the
to confirm
button to
3 - Installing your modem/router
SAGEM F@st™ 1200 User Guide - 252417101-01
Page 3-5