Block Setting - Mitsubishi Electric AG-150A Instruction Book

7-9 Block Setting

To perform a batch monitoring/control of multiple air conditioning unit groups, the groups need to be registered to a block. Touch [Blocks]
on the screen that appears when [Initial Settings] on the menu bar in the setting change screen to register groups to a block.
* Blocks are used as a unit of control for energy-saving and peak-cut control.
Note: If the user logs in as a building manager, some of the operations may be prohibited.
Note: If the system is connected to the TG-2000A, make all settings and changes from the TG-2000A so that the data in TG-2000A and
AG-150A will match.
Block No.
Block name button
Group button
7-9-1 Setting a block name
Touch the block name button, and enter the block name on the keyboard that appears in 20 characters or less.
Press [Save setting] on the block setting screen to save the settings.
Note: The following characters cannot be used in the group name: < > & " '
7-9-2 Registering a group in a block
Touch on the number of the group to register on the group selection screen that appears when the group button is touched. An orange
frame will appear around the selected item. (The name of the group that was touched last will appear.) Touch the selected item again to
deselect it (no orange frame).
Press [Save setting] on the block setting screen to save the settings.
* When changes are made to the settings, it will take a few minutes for the screen to return to the Main menu.
– 65 –
Save Settings