Mitsubishi Electric AG-150A Instruction Book page 30

(2) Ventilation equipment (LOSSNAY) group
Item selection
frame
An orange frame
appears around
the selected item.
4Remote controller
operation prohibit switch
Function
1 ON/OFF Select the operation
status (ON or OFF).
2 MODE Select the desired
operation mode from
one of the icons below
"Mode".
3 Fan speed Use the Up/Down
arrows below "Fun
Speed" to set the fan
speed.
4 Prohibiting local Press the button that
remote controller corresponds to the
operation desired function and
setting to permit or
prohibit the operation
from the remote
controller. The functions
that can be prohibited
are as follows: ON/OFF
and filter sign reset.
5 Filter sign reset Press "Reset" under
"Filter Sign".
6 OK Press the OK button to
reflect the change.
7 Cancel Press the Cancel button
to cancel the change.
5Filter sign reset
Operation method
An orange frame will appear around the selected button.
An orange frame will appear around the selected mode.
2-speed model:
(Fan speed setting is not available on some indoor units.)
Pressing of each button toggles through the following three options:
Retention of current status → Permit → Prohibit
Filter sign reset
Filter cleaning warning sign will be cleared. (Cumulative operation time is reset.)
Pressing the OK button saves the setting and takes the screen back to the previous
screen (Floor layout or Block display).
Pressing the Cancel button cancels the change and takes the screen back to the
previous screen (Floor layout or Block display).
1ON/OFF switch
→
(Low)
Retention of
current status
ON/OFF
– 29 –
2Operation mode switch
6OK
Display
→ →...
(High)
Permit
3Fan Speed
7Cancel
Prohibit