Mitsubishi Electric AG-150A Instruction Book page 71

7-10-2 Changing the floor layout
On the Floor Layout screen, select the group to be moved. (An orange
frame appears around the selected group.)
* Groups that have been registered but not assigned a designated
spot will appear at the top left corner of the bottom floor. (If the
maximum number of displayable groups in the space described
above is exceeded, the rest of the groups will be displayed in the
space on the right of it.)
Touch the Cut button to copy the selected group. (A pale orange
frame will appear around the selected group.)
With the pale orange frame being displayed, select the floor to move
the group to, and touch the Paste button to move the selected group
to the selected floor.
To cancel, touch the Paste button with the cursor on the original group
to deselect it, and the orange frame will disappear.
Touch the Save Settings button to save the changes.
* If an attempt is made to exit the screen by touching the menu bar or
the sub menus without touching the Save Settings button, a popup
warning will appear. If the screen is exited without first touching the
Save Settings button, the changes made will not be reflected.
– 70 –