User Operation - Mitsubishi Electric AG-150A Instruction Book

6. User operation

The following screens are used under user operation.
• Floor layout/block display screens .......................... Displays the operation status (ON/OFF), error status of the air conditioning
• Operation setting screen ......................................... Use to perform collective or individual group operation (ON/OFF, operation
Accessing the Floor layout, Block display, and Air conditioning unit operation setting screens
Floor layout (detailed icons)
Press [OK] or
[Cancel].
(Applicable only
when the operation
screen is accessed
from the Floor
display screen)
Block display
OK button
Air conditioning unit
Zoom-out button
Operation button
Select a
group and
press
[Operate].
Press [Block].
Cancel button
operation screen
system, and room temperature.
This is the screen that is normally used.
mode, air flow direction, fan speed, temperature setting, prohibition/permission
of operation from local remote controller, filter reset, room temperature).
Note: Different models have different functions available.
Block button
Press
[ ]
Press
[ ]
Press [Floor].
Select a group and
press [Operate].
Press [OK] or
[Cancel].
(Applicable only
when the operation
Block display
screen is accessed
from the Block
display screen)
Refer to Section 6-1 "Operation condition
monitoring" (P 24).
– 23 –
Refer to Section 6-1 "Operation condition
monitoring" (P 24).
Zoom-in button
Floor layout (simplified icons)
Press [Block].
Floor button
Press [Floor].
Operation
button