Mitsubishi Electric AG-150A Instruction Book page 35

(2) Select the day of the week
Schedule content button
(3) Set the contents of the schedule
(Air To Water (PWFY))
Days of the week menu
(Air Conditioner)
(LOSSNAY)
Select the days of the week from the weekly schedule setting screen
and touch the schedule content button to bring up the schedule
content setting screen.
The ON/OFF events that are schedules will appear as inverted
triangles and triangles (
* Only the ON/OFF events are displayed. Vane settings and permit/
prohibit settings will not be displayed.
Note: When multiple groups are selected, those settings that have
been made for each group will not be displayed.
Press [OK] to delete the schedule, or press [Cancel] to exit the
screen without saving any changes.
Make the settings for the execution time, operation patterns (ON/OFF,
operation mode, setting temperature, airflow direction, fan speed,
remote controller operation prohibition) on the schedule content
setting screen, and then touch the [OK] button. Not all settings need to
be made. The settings for only the operation mode or the setting
temperature, for example, can be made.
Note: When setting a schedule for all groups or for a block, it is
possible to set all operation modes such as Auto mode etc, but
if some targeted air conditioner units do not have such a
function, then those units will not run in the specified mode.
When setting the schedule, consider what functions are
supported by the air conditioner units.
Note: When setting a schedule for all groups or for a block, it is
OK button
possible to set prohibit remote controller items individually.
When allowing remote controller operation under K control,
however, all items must be set enable.
Note: When setting a schedule for ventilator units (LOSSNAY), the
temperature setting is not displayed. Moreover, the prohibit
remote controller operation is simply [ON/OFF].
Note: Only the ON/OFF operation is possible on the general
equipment.
– 34 –
: ON; :OFF, :Other settings).