Mitsubishi Electric AG-150A Instruction Book page 31

(3) Air To Water (PWFY) (Booster and Water HEX unit) group
Item selection
frame
An orange frame
appears around
the selected item.
4Remote controller
operation prohibit switch
Function
1 ON/OFF Select the operation status
(ON or OFF).
2 MODE Select the desired
operation mode from one
of the icons below "Mode".
3 Set Temperature Set the temperature by
using the Up/Down arrows
below "Set Temp".
4 Prohibiting local Press the button that
remote controller corresponds to each of the
operation following buttons to permit
or prohibit access to these
functions:
ON/OFF, operation mode,
temperature, and
circulating water
replacement sign reset.
5 Circulating water Press the OK button with
replacement the circulating water
sign reset replacement sign reset
button being touched.
6 OK Press the OK button to
reflect the change.
1ON/OFF switch
5Circulating water
replacement sign reset
Operation method
An orange frame will appear around the selected button.
An orange frame will appear around the selected mode.
Pressing the Up/Down arrow increases/decreases the temperature by one degree
respectively.
The settable temperature range depends on the mode and model. If the Up arrow is
touched when the upper limit temperature is displayed.
The lower limit temperature will appear, and the Down arrow vice versa.
[Booster unit]
Heating:
Heating ECO:
Hot Water:
Anti-freeze:
Cooling:
* Temperatures are displayed Fahrenheit if Fahrenheit is selected.
Pressing of each button toggles through the following three options:
Retention of current status → Permit → Prohibit
Circulating water
The circulating water replacement sign is reset.
Pressing the OK button saves the setting and takes the screen back to the previous
screen (Floor layout or Block display).
*
30 ~ 50°C / 87~122°F
30 ~ 45°C / 87~113°F
30 ~ 70°C / 87~158°F
10 ~ 45°C / 50~113°F
Invalid
Retention of
current status
ON/OFF
Operation mode
Temperature
setting
replacement
– 30 –
2Operation mode switch
6OK
Display
*
[Water HEX unit]
Heating: 30 ~ 45°C / 87~113°F
Heating ECO: 30 ~ 45°C / 87~113°F
Hot Water: Invalid
Anti-freeze: 10 ~ 45°C / 50~113°F
Cooling: 10 ~ 30°C / 50~87°F
Permit
3Temperature
7Cancel
Prohibit