Mitsubishi Electric AG-150A Instruction Book page 36

Air-conditioner control system centralized controller
Hide thumbs Also See for AG-150A:
Table of Contents

Advertisement

(4) Copy a schedule to another day of the week or to another group
(5) Save the contents of schedule
• Schedule setting screen
1. Setting Time
Function
1
Setting Time
Touch the
to set the start time.
2
ON/OFF/
Slect the operation
Optimized Start
status (ON, OFF,
Optimized start).
Note: When CITY MULTI S Series (PUMY) is used, set the temperature at 17°C/63°F or above in heating mode.
* Refer to the explanation of operation screen on page 27 for other items.
Copy button
Paste button
Operation method
buttons
Touching the
decrease the value by one (settable in 1-minute increments).
An orange frame will appear around the selected button.
Note: When [Optimized Start] is selected, set the operation mode and preset
Note: Air To Water (PWFY) and LOSSNAY have no Optimized Start function.
To copy the schedule of a given day to another day, select the days of
the week from the weekly schedule setting screen, touch [Copy] to
select it, select a day to copy the schedule to, and touch [Paste].
To copy the weekly schedule for one group to another group, select
the group from the weekly schedule setting screen (Floor layout or
block display screen), touch [Copy], select a group to copy the
schedule to, and touch [Paste].
* The settings of one type of equipment cannot be copied to the
settings of a different type of equipment. (i.e., The settings of air
conditioning units cannot be copied to ventilation equipment
(LOSSNAY) settings.)
* Available operation modes and setting temperature range varies
with models.
Copy destination frame
A pale orange frame appears
around the copy destination unit.
After all the settings have been made, touch the [OK] button to save
the schedule settings.
Touch the [Cancel] button to go back to the previously saved settings
without making any changes.
2. ON/OFF switch
button will increase the value by one, and touching the
temperature as well. If "Prohibit Remote Controller" is set at the same time,
remote controller is prohibited at its setting time.
– 35 –
Display
button will

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ag-150a-a

Table of Contents