High Security Disarm; Disarming Without A Remote - Clarion UNGO Pro Security S670 Owner's Manual

➜

high security disarm

This security system offers High Security Disarm. High Security
Disarm is a feature that makes it possible to silence and reset the
system while it is triggering, without disarming the system. If the
system is triggered and the siren has been sounding for longer
than six seconds, pressing
and return the unit to the armed state. The system will not
disarm, but rather reset. This prevents you from disabling the
system should you wish to disarm it without visually checking the
vehicle. Pressing
system; pressing this button during the first six seconds of the
triggered sequence will disarm the security system immediately.
The six second timer is provided for your convenience, in case the
system is accidentally triggered.
➜

disarming without a remote

If your remote is lost or damaged, you can manually disarm your
vehicle security system. To disarm the system without a remote,
you must have the vehicle's ignition key and know where the
Valet button is located. Be sure to check with your installer at the
time of installation for the location of the Valet button.
20
on the remote will stop the trigger
after resetting the system will disarm the
© 2006 directed electronics, inc.