Silent Mode - Clarion UNGO Pro Security S670 Owner's Manual

Location of Valet Button_________________________________
➜

silent mode

To temporarily turn off the arm or disarm chirps, use Silent
Mode™. Simply press
arming or disarming, and the confirmation chirp(s) will be
eliminated for that one operation only. If you want the
arm/disarm chirps turned off permanently, your dealer can do
this for you.
note: The Warn Away
bypassed if the system is armed using Silent Mode. This
ensures that no chirps will be emitted by the siren in an
area you want chirp-free. The system is still fully capable
of triggering by heavy impacts. Only the Warn Away
response is bypassed.
© 2006 directed electronics, inc.
To disarm the security system,
turn the ignition to the ON
position. Press the Valet button
within 15 seconds. After five
seconds, the system will disarm.
If the system does not disarm,
you may have waited too long;
turn the ignition off and on and
try again.
®
for less than one second before
response to lighter impacts is
DRW-35
®
21