Limiting The Embedded Web Server To Read-Only Mode; Disabling The Embedded Web Server; Accessing The Embedded Web Server - 3Com V7122 User Manual

Default Attributes for the Accounts
Table 20
Account / Attribute
Primary Account
Secondary Account
* The access level of the primary account cannot be changed; all other account-attributes can be
modified.
The first time a browser request is made, users are requested to provide their account's
username and password to obtain access. If the Embedded Web Server is left idle for more
than five minutes, the session expires and the user is required to re-enter his username and
password.
To access the Embedded Web Server with a different account, click the Log Off
button and re-access with a new username and password.
For details on changing the account attributes, see
Note that the password and username can be a maximum of 19 case-sensitive characters.
To reset the username and password of both accounts to their defaults, set the ini file
parameter 'ResetWebPassword' to 1.

Limiting the Embedded Web Server to Read-Only Mode

Users can limit access to the Embedded Web Server to read-only mode by changing the ini
file parameter 'DisableWebConfig' to 1. In this mode all Web screens, regardless of the
access level used, are read-only and cannot be modified. In addition, the following screens
cannot be accessed: 'Quick Setup', 'Web User Accounts', Maintenance Actions', and all of
the file-loading screens.
Read-only policy can also be applied to selected users by setting the access level
of the secondary account to 'User Monitor' (DisableWebConfig = 0) and
distributing the primary and secondary accounts to users according to the
organization's security policy.
When DisableWebConfig is set to 1, read-only privileges are applied to all
accounts regardless of their access level.

Disabling the Embedded Web Server

Access to the Embedded Web Server can be disabled by using the ini file parameter
'DisableWebTask = 1'. The default is access enabled

Accessing the Embedded Web Server

To access the Embedded Web Server:
V7122 Gateway User Guide
Username
(Case-Sensitive)
Admin
User
Password
(Case-Sensitive)
Admin
User
Configuring the Web User
Access Level
Security Administrator*
User Monitor
Accounts.
69