3Com V7122 User Manual page 103

To delete a remote NFS file system:
Click the Edit radio button for the row to be deleted.
1
Click the Delete Line button; the row is deleted.
2
To save the changes so they are available after a power fail, see
3
To modify an existing remote NFS file system:
Click the Edit radio button for the row to be modified.
1
Change the values on the selected row according to your requirements.
2
Click the Apply New Settings button; the remote NFS file system is mounted using the
3
new settings. Check the Syslog server for the 'NFS mount was successful' message.
To save the changes so they are available after a power fail, see
4
Figure 40 shows an example of an NFS table definition using ini file using parameter tables
(for information on parameter tables, see
NFS ini File Example
Figure 40
[ NFSServers ]
FORMAT NFSServers_Index = NFSServers_HostOrIP, NFSServers_RootPath,
NFSServers_NfsVersion, NFSServers_AuthType, NFSServers_UID, NFSServers_GID,
NFSServers_VlanType;
NFSServers 1 = 101.1.13, /audio1, 3, 1, 0, 1, 1;
[ \NFSServers ]
Configuring the IP Routing Table
The IP routing table is used by the gateway to determine IP routing rules. It can be used, for
example, to define static routing rules for the OAM and Control networks since a default
gateway isn't supported for these networks (see
the gateway searches this table for an entry that matches the requested destination host /
network. If such entry is found, the gateway sends the packet to the indicated router. If no
explicit entry is found, the packet is sent to the default gateway (configured in Network
Settings>IP Settings screen). Up to 50 routing entries are available.
To configure the IP Routing table:
Open the 'IP Routing Table' screen (Advanced Configuration menu > Network
1
Settings > IP Routing Table option); the 'IP Routing Table' screen is displayed.
V7122 Gateway User Guide
Using Parameter Tables).
Multiple IPs). Before sending an IP packet,
Saving Configuration.
Saving Configuration.
103