Accessing The Embedded Web Server; Configuring The V7122 Gateway Basic Control Protocol Parameters - 3Com V7122 Installation Manual

Accessing the Embedded Web Server

To access the Embedded Web Server, follow these 4 steps:
Open a standard Web-browsing application such as Microsoft™ Internet Explorer™
1
(Version 6.0 and higher) or Netscape™ Navigator™ (Version 7.2 and higher).
In the URL field, specify the IP address of the gateway (for example, http://10.1.10.10 for
2
the first module of the V7122 gateway); the Embedded Web Servers Enter Network
Password screen appears, shown in
Embedded Web Server Login Screen
Figure 12
Enter the username (default:
3
Name and Password fields are case-sensitive.
Click OK; the Quick Setup screen is accessed, shown in
4
14 (SIP).

Configuring the V7122 Gateway Basic Control Protocol Parameters

To configure the V7122 gateway basic control protocol parameters use the Embedded Web
Servers Quick Setup screen.
For H.323, see Configuring Basic H.323 Parameters
For SIP, see Configuring Basic SIP Parameters
When you have completed the above relevant section you are then ready to start using the
V7122 gateway. For information on how to fully configure the VoIP gateway, see the V7122
Digital Gateway User Guide.
28
Figure 12.
), and password (default:
Admin
.
V7122 Digital Gateway Installation Guide
). Note that the User
Admin
Figure 13 (H.323), and
.
Figure