3Com V7122 User Manual page 161

Hide thumbs Also See for V7122:
Table of Contents

Advertisement

ini File Field Name
Web Parameter Name
ECHybridLoss
GwDebugLevel
[Debug Level]
CDRReportLevel
[CDR Report Level]
CDRSyslogServerIP
[CDR Server IP Address]
HeartBeatDestIP
HeartBeatDestPort
HeartBeatIntervalmsec
V7122 Gateway User Guide
Valid Range and Description
Sets the four wire to two wire worst case Hybrid loss, the ratio between the
signal level sent to the hybrid and the echo level returning from the hybrid.
0 = 6 dB (default)
1 = 9 dB
2 = 0 dB
3 = 3 dB
Defines the Syslog logging level (usually set to 5 if debug traces are
needed).
0 = Debug is disabled (default)
1 = Flow debugging is enabled
2 = Flow and board interface debugging are enabled
3 = Flow, board interface and stack interface debugging are enabled
4 = Flow, board interface, stack interface and session manager debugging
are enabled
5 = Flow, board interface, stack interface, session manager and board
interface expanded debugging are enabled
Determines whether or not CDRs are sent to the Syslog server, and if
enabled, at which events they are sent.
Valid options include:
0 = Call Detail Record (CDR) is not used.
1 = CDR is sent to the Syslog server at the end of each call.
2 = CDR report is sent to Syslog at the start and end of each call.
3 = CDR report is sent to Syslog at connection and at the end of each call.
The CDR Syslog message complies with RFC 3161 and is identified by:
Facility = 17 (local1) and Severity = 6 (Informational)
This parameter replaces the EnableCDR parameter.
Defines the destination IP address for CDR logs.
The default value is a null string that causes the CDR messages to be sent
with all Syslog messages.
The CDR messages are sent to UDP port 514 (default Syslog port).
Destination IP address (in dotted format notation) to which the gateway
sends proprietary UDP 'ping' packets.
The default IP address is 0.0.0.0.
Destination UDP port to which the heartbeat packets are sent.
The range is 0 to 64000.
The default is 0.
Delay (in msec) between consecutive heartbeat packets.
10 = 100000.
-1 = disabled (default).
161

Advertisement

Table of Contents
loading

Table of Contents