10 In the Remote IP field, enter the service request (client) sender's IP address.
Leave it blank to accept all incoming service requests regardless of the senders'
IP address.
11 Click Save/Apply to add the virtual server.
Removing a Virtual Server
To remove a virtual server, complete the following steps.
1
Click Advanced on the main screen.
2
Click IP Networking. The NAT screen opens.
3
Click Virtual Servers. The Virtual Servers screen opens.
4
From the NAT -- Virtual Servers Setup screen, select Remove in the Remove
column next to the server you wish to remove.
5
Click Remove to remove the NAT Virtual Server.
4036168 Rev A
Virtual Servers Setup
221