Table of Contents
Advertisement
Chapter 7 Advanced Configuration
10 In the MAC Mask field, enter the mask for the source MAC address from which
the packets are being sent and the MAC Mask for the destination MAC address.
A MAC mask of ff:ff:ff:00:00:00 matches all devices made by the same
manufacturer (identified by the first three pairs of the MAC address). A MAC
mask of ff:ff:ff:ff:ff:ff matches a single device.
11 In the DSCP Check field, select the matching DSCP value from the list of Diffserv
code point.
12 Select the Marker field and choose from the list of Diffserv code point (DSCP)
values to mark the specified data flow.
13 Select the Queue field and choose from the list of queues.
14 Click Save.
Queues Configuration
Use Queues Configuration to configure QoS queues for each WAN connection type.
By configuring the queues, you determine how the packets will be processed
according to the assigned priorities. A queue with a higher priority has lower queue
precedence.
Path: Advanced > QoS > Queues Configuration
To set up your queues, complete the following steps.
1
Click Advanced on the main screen. The Upstream Quality of Service screen
opens.
210
4036168 Rev A
Advertisement
Table of Contents
