Table of Contents
Advertisement
Chapter 6 Security Configuration
3
Click Add. The Add IP Filter Incoming screen opens.
4
In the Filter Name field, enter the name of the filter.
5
In the Protocol field, select one of the following protocols:
TCP/UDP
TCP
UDP
ICMP
6
In the Source IP address field, enter the source IP address of the server sending
the incoming packets.
7
In the Source Subnet Mask field, enter the subnet mask of the server sending the
incoming packets.
8
In the Source Port field, enter the port number of the server sending the
incoming packets. You can enter one port or a range of ports using the following
format: port or port:port.
Example: 0:5 indicates ports 0 through 5.
9
In the Destination IP address field, enter the destination IP address for the server
receiving the packets.
10 In the Destination Subnet Mask field, enter the subnet mask for the server
receiving the packets.
176
4036168 Rev A
Advertisement
Table of Contents
