Wireless Bridge - Cisco DDR2200 Series Installation And Operation Manual

Wireless Bridge

Wireless LAN Bridging (also referred to as a Wireless Distribution System, WDS)
refers to two or more 802.11 access points that send traffic between them (from
access point to access point) as opposed to between access point and a client
computer.
The Wireless Bridge screen allows you to configure the wireless bridge features of
the wireless LAN interface as follows:
Select Wireless Bridge in the AP mode to disable access point functionality.

Select Access Point in the AP mode to enable access point functionality. Wireless

bridge functionality will still be available and wireless stations will be able to
associate to the AP.
Select Disabled in the Bridge Restrict field to disable wireless bridge restriction

so any device can communicate with the residential gateway over the wireless
bridge.
Select Enabled in the Bridge Restrict field to enable wireless bridge restriction to

restrict the bridges that can communicate with the residential gateway over the
wireless interface.
Enter the MAC Address of the remote bridge in the Remote Bridges MAC

Address field.
Path: Home Network > Wireless > Advanced > Wireless Bridge
Bridge Restrict Disabled
4036168 Rev A

Wireless Bridge

153