Add More Wps Clients; Add Both Wps And Non-Wps Clients - NETGEAR DGND3300v2 User Manual

N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2

Add More WPS Clients

Note: Your wireless settings remain the same when you add another
WPS-enabled client, as long as the Keep Existing Wireless
Settings check box is selected in the Advanced Wireless Settings
screen (select Wireless Settings under Advanced in the N300
wireless modem router main menu). If you clear this check box,
when you add the client, a new SSID and passphrase will be
generated, and all existing connected wireless clients will be
disassociated and disconnected from the N300 wireless modem
router.

To add a wireless client device that is WPS enabled:
1. Follow the procedures in
PIN Entry to Add a WPS Client
2. For information about how to view a list of all devices connected to your N300 wireless
modem router (including wireless and Ethernet connected), see
Devices on page 57.

Add Both WPS and Non-WPS Clients

For non-WPS clients, you cannot use the WPS setup procedures to add them to the wireless
network. You need to record, and then manually enter your security settings (see
Configure Your Wireless Settings

To connect a combination of non-WPS-enabled and WPS-enabled clients to the N300
wireless modem router:
1. Configure the network names (SSIDs), select the WPA/PSK + WPA2/PSK radio button
on the Wireless Settings screen (see
page 18), and click Apply.
2. On the WPA/PSK + WPA2/PSK screen, select a passphrase and click Apply. Record this
information to use when you add additional clients.
3. For the non-WPS devices that you want to connect, open the networking utility and follow
the utility's instructions to enter the SSID, WPA/PSK + WPA2/PSK security method, and
passphrase.
4. For the WPS devices that you want to connect, follow the procedure in
to Add a WPS Client
Note: To make sure that your new wireless settings remain in effect, verify
that the Keep Existing Wireless Settings check box is selected in
the WPS Settings screen.
Use a WPS Button to Add a WPS Client
on page 25.
on page 18).
Manually Configure Your Wireless Settings
on page 24 or Use PIN Entry to Add a WPS Client
Wireless Settings
28
on page 24 or Use
View a List of Attached
Manually
on
Use a WPS Button
on page 25.