NETGEAR DGND3300v2 User Manual page 68

N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2
You can also type \\readyshare in the address field of your Web browser.
Note: If you logged in to the N300 wireless modem router before you
connected your USB device, you might not see your USB device in
the N300 wireless modem router screens until you log out and then
log back in again.
The following table explains the fields and buttons in this screen.
Fields and Buttons
Network Device Name
Available Network Folder Name
Folders
Volume Name
Total/Free Space
Share Name
Read/Write Access
Edit button
Safely Remove USB Device button
Description
The default is \\readyshare. This is the name used to access
the USB device connected to the N300 wireless modem
router.
Full path of the used by the network folder.
Volume name from the storage device (either USB drive or
HDD).
Shows the current utilization of the storage device.
• You can click the name shown, or you can type it in the
address field of your Web browser.
• If Not Shared is shown, then the default share has been
deleted and no other share for the root folder exists. Click
the link to change this setting.
• Shows the permissions and access controls on the
network folder:
• All - no password allows all users to access the network
folder.
• admin uses the same password that you use to log in to
the N300 wireless modem router main menu.
You can click the Edit button to edit the Available Network
Folders settings. See
Click to safely remove the USB device attached to your
N300 wireless modem router. See
page 72.
USB Storage
68
Edit a Network Folder on page 69.
Unmount a USB Drive on