Changing The Fan Mode; Programmable Thermostats; Programming; Setting The Time - Trane Thermostats Installation And Operation Manual

Changing the Fan Mode

Note: If you are unable to see the fan mode, check the system type setting in the installation
There are two fan modes. Each are indicated by an icon on the display:
To change the fan mode:
1. Press
2. Press
3. Tap

Programmable Thermostats

Programmable thermostats contain all of the functionality of the non-programmable thermostats,
but they also keep track of the date, day of week, and time of day for scheduling purposes.

Programming

This section describes how to program the thermostat after it has been installed and configured.

Setting the Time

The time must be set in the thermostat to ensure operation of the schedule.
Note: The date is set during configuration and the day of the week is calculated automatically
To set the time:
1. Press
2. Make changes to the hour and minute, as needed:
3. Press and hold
BAS-SVX36C-EN
configuration options to make sure that it is specified as a system with a fan.
Auto mode turns the fan on and off as needed according to equipment configuration.
On runs the fan continuously.
> > .The current mode flashes.
or to change the mode.The selected mode flashes.
Note: If you are unable to change the mode and
or Unlocking Modes, " p.
or wait 5 sec to save and exit.
according to the date.
> > >
Mo
AM
Note: The thermostat automatically returns to normal operating mode if no buttons are
pressed for 10 sec.
• Press or to switch between hours and minutes.The changeable option flashes to
indicate that it can be changed.
• Press or to change the value of the option.
for 2 sec or wait 10 sec to apply the change and exit.
flashes, the mode is locked. See
40.
> > .The hour flashes to indicate that it can be changed.
Operation
"Locking
35