Changing Periods - Trane XL824 User Manual

Changing Period Start or End Times
1. Press anywhere in the Period to make it
active. Other Periods will dim and the Start
and End times for this Period will be in a
black box.
2. Press the TIME START or TIME END and
adjust the time using the UP and DOWN
arrows. Note: The XL824 uses intelligent
technology and will not allow setting an
illogical start or end time. Periods must be
at least 30 minutes in duration.
Changing Period Set Points
1. Press the active Period's Cooling or Heating
Set Point.
2. Adjust the Set Point using the UP or DOWN
arrows.
Changing the Period Name
1. Press the PERIOD NAME (Wake, Away, etc.).
2. Select a predefined name or press NEW and
select NEXT.
3. If selecting a new name, enter the name
using the on-screen keyboard.
4. Press NEXT.
032-5090-03
Press to adjust
Start and End
Times
Schedule
6:00 am 8:00 am
Time
78º
Start
Wake
Time
End
70º
Press Apply to save
changes and exit
When all changes have been made, press APPLY
to save and exit, or press CANCEL to discard all
changes that were made to this Schedule.

Changing Periods

Press in the red or blue area, then adjust
the Set Point using the up
and down arrows
Mon Tue Wed Thu Fri Sat Sun
6:00 pm
85º
Use the Up and
Down Arrows to
Away Home
change values
62º
Apply
10:00 pm
78º 82º
Sleep
70º 62º
Cancel
Press in the gray area
to rename the period
page 9