Index Operating instructions General information User commands Power cuts Temperature precision Installation instructions Position Removing the thermostat from its base Setting the micro-switches Replacing thermostat on its base Specifications A70 UG 007 E - 0299...
Operating instructions Your new THS thermostat has been designed to provide precise control and - forced heating (the word “EHt“ display of the ambient temperature. It is displayed for 5 seconds). also displays all the other information you need concerning your system. - stops the thermostat and the The symbols on the keys and the infor- system...
Power cuts ( Outdoor temp. option): When the outdoor temperature One of this thermostat’s special fea- option is connected to your thermo- tures is that it does not need a bat- stat, you can display this value by tery to conserve the selected set pressing the key.
Installation instructions Position Removing the thermostat from its base To operate correctly, the thermostat must be positioned on an indoor par- 1) Place a flat screwdriver blade in tition wall in a part of the building that the the slot in the middle of the is regularly occupied.
Setting the micro-switches Additional heat pump Normal heat pump * Heat pump: Not used Not used Additional: the compressor system 2 min. minimum aux. heat. operat. 4 min. minimum aux. heat. operat. ceases to operate when the auxiliary Keyboard blocked heating is operating.
Output terminal functions Specifications Make-up or forced auxiliary Nominal voltage 20-30 VAC, or heating 24 VDC nomi- Compressor 1 in cooling or heating Current amps (AC) 0.05 to 0.5 A Compressor 2 in cooling or direct per out- heating put with max. Fan starting peaks at 1A Reversing valve supplied...
Page 12
88191 Golbey Cedex France http : // www.trane.com Société Trane - Société Anonyme au capital de 41 500 000 F - Siret 306 050 188-00011 - RCS Epinal B 306 050 188 Numéro d'identification taxe intracommunautaire : An American Standard Company...