Canceling A Recording Or Edit (Undo/Redo) - Roland HP508 Owner's Manual

Recording the Song
10.
Repeat steps 8 and 9 as necessary .
11.
To stop recording, press the
The [ ] button goes dark, and step recording ends.
MEMO
You can undo (cancel) the recorded result (p. 62).
How note value and gate time are related
The following table shows how note value and gate time are
related.
On the FA's sequencer, the TPQN (ticks per quarter note)
resolution is 480.
This means that a quarter note has a gate time of 480 ticks.
Note Gate time
30
40
45
60
80
90
120
160
180
MEMO
The gate time that is recorded during step recording is
the original gate time value multiplied by the GATE TIME
value. For example if GATE TIME is set to 80 % and you
enter a quarter note, the gate time is 480 x 0.8 = 384.
62
[ ] button .
Note Gate time
240
320
360
480
640
720
960
1920
3840
Canceling a Recording or Edit (Undo/
Redo)
You can cancel a recording or editing operation to return to the
previous state (Undo). You can also cancel an Undo operation
(Redo).
Returning to the previous state (Undo)
1.
In the SEQUENCER screen (p . 59), hold down the
[6] (Undo)
button and press the
The Undo operation is executed, cancelling the recording or editing
operation that you just performed.
Cancelling the Undo operation (Redo)
1.
In the SEQUENCER screen (p . 59), hold down the
button and press the [6] (Redo)
The Redo operation is performed, cancelling the Undo operation
that you just performed.
[SHIFT]
button .
[SHIFT]
button .