About Sd Cards - Roland HP508 Owner's Manual

About SD Cards

When using a commercially available SD card, insert it as follows.
1.
Remove the screws from the rear panel SD card protector .
When this unit is shipped from the factory, the SD card protector
screws are installed as shown in the illustration. To remove the card
protector, you must first use a phillips screwdriver to remove the
screws.
NOTE
•
Never turn off the power or disconnect the SD cards while the
"Processing..."
screen indicates
•
Never remove the SD card while the writing is in progress.
2.
Pull out the included SD card, insert your SD card into the
slot, and then reattach the SD card protector .
*
Some SD card types or SD cards from some manufacturers may
not record or play back properly on the FA.
* All SD cards eventually wear out. We recommend that you
consider the SD card not as a permanent storage site, but as
a place to store data temporarily. We also recommend that
you back up important data onto the another media that is
supported by your unit.
108
Carefully insert the SD
cards all the way in—until it
is firmly in place.
Preparing an SD card for use
When using a commercially available SD card with the FA,
you must first format it as described in
Card (Format SD Card)" (p.96). However, don't format the SD
card that's included with the FA. If you format the included
SD card, you'll lose all of the demo song data that was on the
card.
Once you format an SD card, the data that used to be on
it cannot be recovered. We recommend that you back up
"Backing-Up SD Card Data to a
the data as described in
Computer"
(p.96).
The memory card write protect feature (LOCK)
The contents of the memory card can
be protected by write protecting it.
To write protect a card, slide the write
protect switch on the side of the
memory card to the "LOCK"
Unlock write protect to delete data on
the card.
The folder structure of an SD card
EXPORT TRACK folder
WAV files created by multi-track export are saved
here.
EXPORT STEREO MIX folder
WAV files created by two-track export are saved
here.
EXPORT SAMPLE folder
WAV files of exported samples are saved here.
EXPORT SMF folder
Exported SMF files are saved here.
IMPORT folder
Files that you want to import to the FA should be
copied here.
ROLAND folder
FA songs and backup data are saved here.
FA folder
"Initializing an SD
Write protect
position.
switch
BACKUP folder
Backup data is saved here.
SCREEN SAVER folder
Screen saver data is saved
here.
SONG folder
Songs and sample data are
saved here.