Roland HP508 System Update

HP508 System Program Version 1.11
This system program updates your HP508 to the latest version 1.11.
How to know the version
Before you start, check the system program version of your HP508.
1. Hold down [ + ] and [ - ] and switch on the power to the unit.
If this shows the latest version (version 1.11 or later), there's no need to update
your HP508.
2. After verifying the displayed version, switch off the power.
Update history
[ Ver.1.11 ]
Additional Functions

Support for the "Piano

Support for the "Piano
What you will need to update your HP508

HP508

USB Memory ( Roland's M-UF1G or M-UF2G is recommended )
* The USB Memory need to be formatted on a HP508.

A computer with a USB connector (Windows 7 / 8, Mac OS X v10.4.3 or later)

Update file downloaded from this page
Cautions with the update

We recommend that you save your user data to a USB memory before you
perform the update. If a problem occurs and your user data is lost, you will be
able to restore the original state by reloading the data you saved. For details on
the procedure, refer to the following sections of the Owner's Manual.
o Copying a Saved Song
Designer" Android application was added.
Designer" iOS application was added.
© 2014 Roland Corp. U.S.