Editing The Effects; Turning Effects On/Off - Roland HP508 Owner's Manual

Editing the Effects

Turning Effects On/off

Here's how to turn effects on/off.
1.
Press the [MENU] button .
2.
"Effects Edit"
Move the cursor to
button .
The EFFECTS EDIT screen appears.
In the EFFECTS EDIT screen, you can edit the parameters in detail
while you view the effect routing.
Tone effect
Effect switch
MEMO
From the STUDIO SET PLAY screen, you can also enter the
EFFECTS EDIT screen by holding down the
pressing the [3] (Effects Edit)
3.
Use the cursor buttons to select the effect switch, and use
the dial to turn it on/off .
MEMO
For details on the parameters, refer to
(PDF).
NOTE
The effect settings that you edit are temporary. They will
disappear when you turn off the power, or select another studio
set or tone. If you want to keep the edited settings, save the
tone, studio set, or system settings respectively.
• Saving a studio set (p. 45)
• Saving a tone (p. 48)
• Saving system settings (p. 97)
52
[ENTER]
and press the
Studio set effect
Effect applied to the entire unit
(System effect)
[SHIFT] button and
button.
"Parameter Guide"
Parameters that can be edited in the EFFECTS
EDIT screen
In the EFFECTS EDIT screen, you can also make the following
settings.
Parameter
Chorus Send
Level
Reverb Send
Studio set Level
M .COMP/IFX
Select
Audio Input
Level
System
TFX Location
Explanation
Specifies the depth of chorus.
Specifies the depth of reverb.
Specifies whether to use the master
compressor (Master Comp) or the insert
effect (IFX).
Adjusts the input volume from the AUDIO
INPUT jack.
Selects whether the total effect is applied to
the sound you play on the keyboard (MAIN)
or on the input from the AUDIO INPUT jack
(Input).