Pcm Drum Kit (Pcmd); Saving A Tone/Drum Kit; Initializing A Tone (Tone Initialize) - Roland HP508 Owner's Manual

Editing a Tone

PCM Drum Kit (PCMD)

Partial 88
Partial 1
WAVE TVF
Pitch TVF Env
Env
Tab Explanation
Common Settings that apply to the entire tone.
Settings for the waveform that is the basis of the
Wave
tone.
WMT
Make settings for velocity-switching between tones.
(Wave Mix Table)
Pitch Settings related to pitch.
Pitch Env Settings for the pitch envelope.
TVF Settings related to the filter.
TVF Env Settings for the TVF envelope.
TVA Settings related to volume.
TVA Env Settings for the TVA envelope.
Output Settings related to output.
Settings for the Drum Comp + EQ Assign part
Comp
compressor.
Settings for the Drum Comp + EQ Assign part
EQ
equalizer.
MFX Settings for the multi-effect.
MFX Control Settings for controlling MFX via MIDI.
MEMO
• You can press a key to switch the partial number that you're
editing.
•
The Drum Comp+EQ Assign part setting is located in the overall
settings for the studio set.
• You can't edit the sounds of the GM2 bank.
48
MFX
TVA
TVA Env
Comp+EQ 1 Comp+EQ 4
Comp+EQ 2 Comp+EQ 5
Comp+EQ 3 Comp+EQ 6

Saving a Tone/Drum Kit

Edits you make to a Tone/Drum Kit are temporary; they will be lost
when you turn off the unit or select another Tone/Drum Kit. If you
want to keep an edited Tone/Drum Kit, you must save it.
NOTE
When you execute the Write operation, the existing data at the
write destination will be overwritten.
1.
Press the [WRITE] button .
The WRITE MENU window appears.
2.
Move the cursor to "Tone"
3.
Use the dial or the [DEC] [INC]
save-destination .
4.
Press the [2] (Rename)
tone/drum kit (p . 45) .
5.
Press the [7] (Write) button .
A confirmation message appears.
If you decide to cancel, press the
6.
Press the [6] (OK) button .
The tone/drum kit is saved.
NOTE
Never turn off the power while data is being saved.

Initializing a Tone (Tone Initialize)

Here's how to initialize the settings of the current tone.
1.
In the TONE EDIT screen (p . 46), press the
button .
2.
Choose "Tone Initialize,"
A confirmation message appears.
If you decide to cancel, press the
3.
Press the [6] (OK) button .
The tone or drum kit is initialized.
NOTE
Never turn off the power while initialization is in progress.
and press the [ENTER] button .
buttons to select the
button and assign a name to the
[7] (Cancel) button.
[5] (Tone Utility)
and press the [7] (Select)
[7] (Cancel) button.
button .