Importing A Computer Smf File Into An Arpeggio Style; (Import Smf); Creating An Arpeggio Style From A Song (Import Song) - Roland HP508 Owner's Manual

Playing Arpeggios
Importing a Computer SMF File into an
Arpeggio Style (Import SMF)
You can create an original arpeggio style by importing an SMF
(Standard MIDI File).
SMF that can be imported
•
Only SMF format 0 is supported. If the data is incorrect,
"Cannot Import SMF Format 1!"
a message of
"Incorrect File!" appears.
• The following data can be imported into an arpeggio:
note data, control change data, channel pressure, and
pitch bend change.
•
A maximum of 500 events of note data can be imported,
with each note-on/off message counting as one event.
• In addition to note events, a total of up to 500 events of
control change messages, channel pressure, and pitch
bend can be imported. If you try to import more than the
allowable number of events, the message
Data!"
appears.
MEMO
• Before you continue, copy an SMF from your computer to the
"IMPORT"
folder of the SD card.
•
A maximum of 200 files in the
detected.
1.
Press the [ARPEGGIO]
2.
[3] (Import SMF)
Press the
The ARPEGGIO SMF IMPORT screen appears.
3.
Use the dial or the [DEC] [INC]
that you want to import, and then press the
button .
MEMO
You can audition the selected SMF by pressing the
button.
4.
Use the dial or the [DEC] [INC]
import-destination Style number (U001–U016) .
5.
Press the [2] (Rename)
arpeggio style (p . 45) .
6.
[7] (Execute)
Press the
A confirmation message appears.
If you decide to cancel, press the
7.
[6] (OK)
Press the button .
The SMF is imported into the Style number you specified.
34
or
"Too Much
"IMPORT"
folder can be
button .
button .
buttons to select the SMF
[7] (Import)
[6] (Preview)
buttons to select the
button and assign a name to the
button .
[7] (Cancel)
button.
Creating an Arpeggio Style from a Song
(Import Song)
You can create an original arpeggio style by importing a track from
the currently selected song.
1.
Press the [ARPEGGIO]
2.
Press the [3] (Import Song)
The ARPEGGIO SONG IMPORT screen appears.
3.
Use the dial or the [DEC] [INC]
that you want to import, and then press the
button .
MEMO
[6] (Preview)
You can press the
track.
4.
[DEC] [INC]
Use the dial or the
import-destination Style number (U001–U016) .
5.
Press the [2] (Rename)
arpeggio style (p . 45) .
6.
Press the [7] (Execute)
A confirmation message appears.
If you decide to cancel, press the
7.
Press the [6] (OK) button .
The track of the song is imported into the specified Style number.
button .
button .
buttons to select the track
[7] (Import)
button to audition the selected
buttons to select the
button and assign a name to the
button .
[7] (Cancel) button.