Zulu2 Software Re-Installation - MicroBoards Technology MX User Manual

MICROBOARDS TECHNOLOGY, LLC

Zulu2 Software Re-Installation

There are 3 methods of reinstalling Zulu2 should the need arise:
A. (Recommended) Insert the Microboards MX Disc Publisher Installation CD into the CD/DVD
ROM drive on your computer and select the Repair option when the installer starts. Click the
Prassi Zulu2 button to reinstall Zulu2, then select the correct MX model. Clicking the Install
All Applications button will reinstall Zulu2, SureThing, and the Toolbox.
Follow these steps once the Zulu2 installer launches:
Note in the upper right-hand corner that during an update of Zulu2, the version currently
installed is listed under the version of Zulu2 to be installed.
Select the language to install; the default is
English.
Click Next.
The files will now be copied from the CD to
the operating system.
Once finished, this screen will appear:
When reinstalling over an existing installation
of Zulu2, the Reboot Computer option may
not appear. If the Reboot Computer option
is available, you should reboot after the
installation.
B. Alternately, verify the model you have
and open
Zulu2 or MX2 Zulu2 directory on the
Installation CD. Run Prassi Zulu2 for
Microboards Setup (EFIGS). exe
from the appropriate directory to
reinstall Zulu2 manually.
C. The Prassi Zulu2 installer was also
added to your hard drive in the event
that you need to reinstall but do not
have access to the Installation CD.
Run Prassi Zulu2 for Microboards
Setup (EFIGS).exe in the C:\Program
Files\Microboards\MX
Applications\MX1
Zulu2 directory on your hard drive,
depending on which model you have.
23
the Applications\MX1
Installer\
Zulu2 or MX2
MX DISC PUBLISHER