MicroBoards Technology MX User Manual page 19

MICROBOARDS TECHNOLOGY, LLC
You will see an entry labeled
"USB Serial Port (COMx)" entry
for each MX Disc Publisher you
have installed.
be the COM port number to be
entered into
screen.
Select the COM port as found on
the Computer
screen.
Next, select the recorder.
the MX-2, select recorders for
both Upper Drive and Lower
Drive.
Finally, select the Printer.
To confirm you have made the correct selection, you
can click on the T box next to each item, as follows:
•
When the T is pressed for the COM Port, the
elevator will move up and down.
•
When the T is pressed for the recorder, the tray
will open and then close.
•
When the T is pressed for the Printer, the belts
will move in reverse.
•
Checking the Don't show this window again
box will bypass the configuration step when
launching Zulu2 again.
reset this option should it be necessary to
configure the system again.
Click the OK button.
The system will now initialize the MX Disc Publisher. The belts will be cleared of any discs and any
discs in the recorders will be removed and rejected.
Once initialization is complete, the system is ready for use.
Please see the Zulu2 for Microboards Disc Publishers manual for more information on using Zulu2.
19
The COMx will
the Configure
Management
For
You will be able to
MX DISC PUBLISHER