Table of Contents
Advertisement
System Requirements
The Microboards MX Disc Publisher has the following minimum requirements and compatibilities:
Supported Operating Systems
Microsoft Windows 2000 with SP4, Windows XP with SP2, or Windows Vista (32-bit only).
Processor
Pentium 4 (or equivalent) CPU, running at 2.0 GHz or faster.
System Memory
Minimum 512 MB of system memory (recommend 1GB for DVD Duplication).
Hard Drive Space
Less than 10MB of free space is required on the system hard drive for the applications and drivers.
A separate internal 7200 RPM hard drive is recommended for storing your data. Using the same
hard drive as the operating system can cause the system to perform slowly.
USB Connection
USB 2.0 is required.
Assembly and Installation
Assembly Instructions
MX Disc Publisher Assembly
Remove the MX Disc Publisher system from the shipping box and confirm you received all of the
items.
Place the MX Disc Publisher on a stable, flat surface. You will need room both in front and behind
the system, as discs will be accessed from both locations.
Install the 2 long input bin posts above the input hopper, with the wide post to the right (shipped
installed).
Install the output bin:
•
Align the two holes in the output bin with the holes on the Front of the printer (numbers 1 and 2).
•
Secure the output bin with the two thumb screws.
•
The output bin should now be securely in place.
•
Next, slide in the 100 disc output spindle into place.
The Output Bin is designed to hang over the front edge
of your work surface.
• Assembly and Installation
6
1
2
Advertisement
Table of Contents
