Using Surething Disc Labeler; Creating New Labels; Printing Labels; Manual Software Re-Installation - MicroBoards Technology G3 User Manual

MICROBOARDS TECHNOLOGY, LLC

Using SureThing Disc Labeler

SureThing Disc Labeler is included with the G3 Disc Publisher and will be installed during the G3
Installation. For more information on using SureThing, please refer to the SureThing Help menu.

Creating New Labels

Any label you create in SureThing must use the Microboards template to print correctly.
1. To create a new label, either click New Project in the Action window on the left, or select New
from the File menu.
2. Click the Select Label button on the lower left corner of the dialog that opens to view the
available label templates if the dialog that opens does not appear as shown below.
3. Highlight CD/DVD Printers in the Media Type column.
4. Highlight Microboards in the Manufacturer column.
5. Select from the options listed in the Label
Type column.
We recommend that you use the 17mm
inner hole template to ensure that your
image will fully cover the printable
surface on both hub printable and non-
hub printable media, adjusting the
Diameter
between media types (see page 13).
6. Click OK to begin designing the label.

Printing Labels

Select Print from the File menu while the label you want to print is open. Be sure that
you have selected the Microboards G Series and that CD/DVD Printer is selected in
the Print Using field before clicking the Print button.
If you are printing more than one copy of a label, enter in the number you wish to print
before clicking the Print button.

Manual Software Re-Installation

The information in this section will only apply to a manual re-installation of the individual software
packages. If you have not yet installed the G3 Disc Publisher using the Installer, it is recommended
that you do so. Installing the G3 Disc Publisher in an incorrect order could result in an unsuccessful
installation.

PrintWrite Software Re-Installation

There are 3 methods of reinstalling the PrintWrite software should the need arise:
A. (Recommended) Insert the Microboards G3 Disc Publisher Installation CD into the CD/DVD
ROM drive on your computer and select the Repair option when the installer starts. Click the
Disc Publishing Software button to reinstall. Clicking the Install All Applications button
will reinstall the PrintWrite software, SureThing, and the Toolbox.
B. The Disc Publisher installers are also located on the Installation CD. To manually reinstall
PrintWrite, browse to the Applications\PrintWrite directory on the Installation CD and run
setup.exe to reinstall PrintWrite manually.
C. The PrintWrite Disc Publisher software installer was also added to your hard drive in the
event that you need to reinstall but do not have access to the Installation CD. Browse to the
C:\Program Files\Microboards\G3 Installer\ Applications directory on your hard drive and
double-click setup.exe to reinstall PrintWrite.
19
Settings when changing
G3 DISC PUBLISHER