Table of Contents
Advertisement
Windows Vista Hardware Installation
The Microboards MX Disc Publisher Installer should always be run when logged in as user with full
Administrator rights. This is required for the driver pre-installation to be successful. Once the MX is
plugged into the PC via the USB connection, the hardware will automatically be found and installed
on your PC.
During the driver pre-installation, you may need to verify that you would like to install the drivers.
If the Installer is run by a user without full Administrator rights, or you do not verify that the drivers
should be installed, the hardware will need to be installed using the Hardware Wizard. Please follow
the directions below.
Windows XP Hardware Installation
The Windows Found New Hardware Wizard will appear during any installation, including when using
the Installer. Please follow all directions in the order in which they appear when using the Installer.
Insert the Microboards MX Disc Publisher CD into a drive in your computer. Follow the instructions
provided by the installer. Connect the MX Disc Publisher to the PC only when you are prompted to.
The operating system will next display the following windows:
1. Select No, not this time and click
Next.
appear:
2. Click the Next button and the files will
be copied from the CD.
• Assembly and Installation
10
The following screen will
3. Click the Next button and the files will
be copied from the CD.
4. Click Finish. The following screen will
appear:
Advertisement
Table of Contents
