Installation Of Drivers And Software; Driver And Microboards Printwrite Installation; Connecting To A Mac; Adding The Microboards Pf-3 Printer - MicroBoards Technology PF-3 User Manual

Installation of Drivers and Software

Driver and Microboards PrintWrite Installation

Drivers for your printer must be installed on a hard disk. Once you have installed the drivers, store the
original installer disc in a safe place.
1. Insert the Installation CD in your system's disc drive. Open the disc icon when it appears on
the desktop.
2. Double-click on the Microboards Disc Printer.mpkg icon. Follow the on-screen instructions,
read and agree to the end user license agreement.
3. When prompted, enter your administrator password.
4. When prompted, click Install. Once the Microboards Installer has completed, a restart is
required.

Connecting to a Mac

DO NOT CONNECT YOUR PF-3 DISC PRINTER BEFORE RUNNING THE INSTALLER
The connection between the Mac and the Microboards PF-3 Disc Printer is done with one USB 2.0
cable.
1. Plug in the AC power cord to the back of the PF-3 Disc Printer.
2. Confirm that the power is turned ON to both the PF-3 Disc Printer and on your Mac.
3. Connect the square shaped end of the USB cable to the back of the PF-3 Disc Printer.
4. Connect the flat, rectangular end of the USB cable into a USB 2.0 port in
your Mac.

Adding the Microboards PF-3 Printer

Once the drivers and software have been installed and the PF-3 connected, the
Microboards PF-3 Printer needs to be added.
1. Click System Preferences in the Dock.
2. Select Print & Fax. If the Microboards PF-3 printer has not been
added automatically, then click the Add or + button to add a
printer.
3. Select Microboards PF-3 from the list and click the Add button.
4. Once the Microboards PF-3 Printer has been added, it will appear
in the available printers list, as shown below.
10
LOCATED ON THE INSTALLATION DISK!!