Table of Contents
Advertisement
MICROBOARDS TECHNOLOGY, LLC
Software Re-Installation
The information in this section will only apply to a manual re-installation of the individual software
packages. If you have not yet installed the MX Disc Publisher using the Installer, it is recommended
that you do so. Installing the MX Disc Publisher in an incorrect order could result in an unsuccessful
installation.
PF Pro Series Toolbox Re-Installation
The Microboards PF Pro Series Toolbox will be installed automatically during the initial installation of
the MX Disc Publisher from the Installation CD. The Toolbox installation is hidden at that time, but
the successful installation of the Toolbox can be verified by the presence of the Toolbox icon in the
tool tray in the lower right corner of your Windows desktop.
1. Load the MX Disc Publisher Installation CD.
2. Select the Repair option when the installer starts.
Note: If you have removed the MX Disc
Publisher Installation by selecting the
Remove option in the installer or by using
the entry in the Add or Remove Programs
window, the installation will run completely
without the Repair option.
3. Click the Microboards PF Pro Series Toolbox button to re-install the Toolbox or the Install
Both Applications button to reinstall both SureThing Disc Labeler and the Toolbox.
4. Once the re-installation is complete, the toolbox will be started automatically, minimizing into
the tool tray.
21
Toolbox Icon in Tool Tray
MX DISC PUBLISHER
Advertisement
Table of Contents
