Installation Of Drivers And Software; Driver And Microboards Printwrite Installation; Connecting To A Mac; Adding The G3 Printer - MicroBoards Technology G3 User Manual

MICROBOARDS TECHNOLOGY, LLC

Installation of Drivers and Software

Driver and Microboards PrintWrite Installation

Drivers and Microboards PrintWrite must be installed on a hard disk. Once you have installed the
software, store the original installer disc in a safe place.
1. Insert the Installation CD in your system's disc drive. Open the disc icon when it appears on
the desktop.
2. Double-click on the Microboards Publisher.mpkg icon. Follow the on-screen instructions,
read and agree to the end user license agreement.
3. When prompted, enter your administrator password.
4. When prompted, click Install. Once the Microboards Installer has completed, a restart is
required.

Connecting to a Mac

DO NOT CONNECT YOUR G3 DISC PUBLISHER BEFORE RUNNING THE INSTALLER
The connection between the Mac and the Microboards G3 Disc Publisher is done with one USB 2.0
cable.
1. Plug in the AC power cord to the back of the G3 Disc Publisher.
2. Confirm that the power is turned ON to both the G3 Disc Publisher and on your Mac.
3. Connect the square shaped end of the USB cable to the back of the G3 Disc Publisher.
4. Connect the flat, rectangular end of the USB cable into a USB 2.0 port in
your Mac.
Adding the GX Series Printer
Once the drivers and software have been installed and the G3 connected, the GX
Series Printer needs to be added.
1. Click System Preferences in the Dock.
2. Select Print & Fax. If the GX Series printer has not been added
automatically, then click the Add or + button to add a printer.
3. Select GX Series from the list and click the Add button.
4. Once the GX Series Printer has been added, it will appear in the
available printers list, as shown below.
9
LOCATED ON THE INSTALLATION DISK!!
G3 DISC PUBLISHER