ZyXEL Communications MES-3528 User Manual page 338

Chapter 41 Product Specifications
Table 119 Firmware Specifications
FEATURE
Authentication,
Authorization and
Accounting
Device Management
Port Cloning
Syslog
Firmware Upgrade
Configuration Backup &
Restoration
Cluster Management
Table 120 Feature Specifications
Layer 2 Bridging
Features
Switching
STP
338
DESCRIPTION
The Switch supports authentication, authorization and
accounting services via RADIUS and TACACS+ AAA servers.
Use the web configurator or commands to easily configure the
rich range of features on the Switch.
Use the port cloning feature to copy the settings you configure
on one port to another port or ports.
The Switch can generate syslog messages and send it to a
syslog server.
Download new firmware (when available) from the ZyXEL web
site and use the web configurator, CLI or an FTP/TFTP tool to
put it on the Switch.
Note: Only upload firmware for your specific model!
Make a copy of the Switch's configuration and put it back on
the Switch later if you decide you want to revert back to an
earlier configuration.
Cluster management (also known as iStacking) allows you to
manage switches through one switch, called the cluster
manager. The switches must be directly connected and be in
the same VLAN group so as to be able to communicate with
one another.
16K MAC addresses
Static MAC address filtering by source/destination
Broadcast storm control
Static MAC address forwarding
Switching fabric: 12.8 Gbps, non-blocking
Max. Frame size: 9 K bytes
Forwarding frame: IEEE 802.3, IEEE 802.1q, Ethernet II, PPPoE
Prevent the forwarding of corrupted packets
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
Multiple Rapid Spanning Tree capability (2 configurable trees)
IEEE 802.1s Multiple Spanning Tree Protocol
MES-3528 User's Guide