Spanning Tree Protocol Status Screen - ZyXEL Communications MES-3528 User Manual

and single spanning tree devices. A network may contain multiple MST regions
and other network segments running RSTP.
Figure 68 MSTP and Legacy RSTP Network Example

13.2 Spanning Tree Protocol Status Screen

The Spanning Tree Protocol status screen changes depending on what standard
you choose to implement on your network. Click Advanced Application >
Spanning Tree Protocol to see the screen as shown.
Figure 69 Advanced Application > Spanning Tree Protocol
This screen differs depending on which STP mode (RSTP, MRSTP or MSTP) you
configure on the Switch. This screen is described in detail in the section that
follows the configuration section for each STP mode. Click Configuration to
activate one of the STP standards on the Switch.
MES-3528 User's Guide
Chapter 13 Spanning Tree Protocol
127