ZyXEL Communications MES-3528 User Manual page 191

The following table describes the labels in this screen.
Table 55 Advanced Application > VLAN Stacking > SVLAN
LABEL DESCRIPTION
SVLAN Enter a service provider's VLAN ID (from 1 to 4094) that should be carried in
ID the incoming frames received on a Tunnel Port.
Add Click Add to insert the entry in the summary table below and save your
changes to the Switch's run-time memory. The Switch loses these changes if it
is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Index This is the index number of the entry.
SVLAN This is the service VLAN ID.
ID
Delete Check the entry(ies) that you want to remove in the Delete column and then
click the Delete button.
Cancel Click Cancel to clear the Delete check boxes.
MES-3528 User's Guide
Chapter 23 VLAN Stacking
191