Aaa Setup - ZyXEL Communications MES-3528 User Manual

Table 64 Advanced Application > AAA > TACACS+ Server Setup (continued)
LABEL
Shared Secret
Delete
Apply
Cancel

25.2.3 AAA Setup

Use this screen to configure authentication, authorization and accounting settings
on the Switch. Click on the AAA Setup link in the AAA screen to view the screen
as shown.
Figure 115 Advanced Application > AAA > AAA Setup
MES-3528 User's Guide
DESCRIPTION
Specify a password (up to 32 alphanumeric characters) as the key to be
shared between the external TACACS+ accounting server and the
Switch. This key is not sent over the network. This key must be the same
on the external TACACS+ accounting server and the Switch.
Check this box if you want to remove an existing TACACS+ accounting
server entry from the Switch. This entry is deleted when you click Apply.
Click Apply to save your changes to the Switch's run-time memory. The
Switch loses these changes if it is turned off or loses power, so use the
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
Chapter 25 AAA
215