ZyXEL Communications MES-3528 User Manual page 170

Chapter 20 Classifier
Click Advanced Application > Classifier in the navigation panel to display the
configuration screen as shown.
Figure 89 Advanced Application > Classifier
The following table describes the labels in this screen.
Table 43 Advanced Application > Classifier
LABEL
Active
Name
Layer 2
Specify the fields below to configure a layer 2 classifier.
Ethernet
Type
Source
MAC
Address
170
DESCRIPTION
Select this option to enable this rule.
Enter a descriptive name for this rule for identifying purposes.
Select an Ethernet type or select Other and enter the Ethernet type number in
hexadecimal value. Refer to
Select Any to apply the rule to all MAC addresses.
To specify a source, select the second choice and type a MAC address in valid
MAC address format (six hexadecimal character pairs).
Table 45 on page 172 for information.
MES-3528 User's Guide