Viewing And Editing Classifier Configuration - ZyXEL Communications MES-3528 User Manual

Chapter 20 Classifier
20.3 Viewing and Editing Classifier
Configuration
To view a summary of the classifier configuration, scroll down to the summary
table at the bottom of the Classifier screen. To change the settings of a rule, click
a number in the Index field.
Note: When two rules conflict with each other, a higher layer rule has priority over
lower layer rule.
Figure 90 Advanced Application > Classifier: Summary Table
The following table describes the labels in this screen.
Table 44 Classifier: Summary Table
LABEL
Index
Active
Name
Rule
Delete
Cancel
The following table shows some other common Ethernet types and the
corresponding protocol number.
Table 45 Common Ethernet Types and Protocol Numbers
ETHERNET TYPE
IP ETHII
X.75 Internet
NBS Internet
ECMA Internet
Chaosnet
X.25 Level 3
XNS Compat
Banyan Systems
BBN Simnet
172
DESCRIPTION
This field displays the index number of the rule. Click an index number to edit
the rule.
This field displays Yes when the rule is activated and No when it is
deactivated.
This field displays the descriptive name for this rule. This is for identification
purpose only.
This field displays a summary of the classifier rule's settings.
Click Delete to remove the selected entry from the summary table.
Click Cancel to clear the Delete check boxes.
PROTOCOL NUMBER
0800
0801
0802
0803
0804
0805
0807
0BAD
5208
MES-3528 User's Guide