Step 4: Connect The Usb Cable - Xerox DOCUMATE 252 User Manual

Installation

Step 4: Connect the USB Cable

10
The DocuMate 252 scanner connects to any available USB port.
Check your computer's manual for USB port locations.
NOTE: You can connect the scanner to your computer while the
computer is running. You do not have to shut down your
computer.
1. Plug the USB cable into the USB port on the scanner and then
into a USB port on the computer. The ports are identified with
the USB symbols.
You can also connect the scanner to a USB port on the
computer's keyboard if it has one, or to a USB hub. If you use a
USB hub, it must have its own power supply already plugged
into an electrical outlet.
NOTE: If you have not installed the software, unplug the USB
cable from the computer and install the software now. When the
software installation is complete, a message tells you to connect
the scanner.
If you are using Windows XP and have plugged the USB cable
into a USB 1.1 port, an information bubble opens explaining
that "A HI-SPEED USB device is plugged into a non-HI-SPEED
USB hub". Plug the USB cable into a USB 2.0 port (if available)
or just disregard the message. If you leave it plugged into the
USB 1.1 port, your scanner may scan a bit slower than the 25
pages per minute, and 50 images per minute available with a
USB 2.0 port.
USB
DocuMate 252 Scanner User's Guide